PR Precision Tikka T3 / T3x Bolt Stop (Bolt Release) replaces the original cast steel unit and eliminates the need for modification when re-barreling the rifle to a different length cartridge. All that is needed is the corresponding bolt face for the desired cartridge family (See PR Precision Tikka Bolt Bodies) and an appropriate length of bolt stop.
PR Precision Tikka T3 / T3x Bolt Stop (Bolt Release) is made from 416 Stainless Steel material and are available in 3 lengths:
- 'Long' - designed for 30-06, Magnum and similar cartridge sizes
- 'Medium' - designed for .308 Win and similar cartridge sizes
- 'Short' - designed for .223 Rem and similar cartridge sizes
Tech Note:
When and why do we need to use a different Tikka Bolt Stop:
The following is an example (converting 6.5 Creedmoor (6.5C) to 7mm PRC (7PRC) and needs to be discussed and installed by a professional gunsmith depending on stock, magazine (Factory, AICS).
Converting a Tikka T3x from 6.5 Creedmoor (6.5C) to 7mm PRC (7PRC) requires addressing three critical components. While all Tikka T3x receivers utilize the exact same frame size, the 6.5C is a short-action, standard bolt-face cartridge, whereas the 7PRC is a long-action, magnum bolt-face cartridge.
- 7PRC Barrel: A pre-fit Tikka barrel or a blank turned by a gunsmith (for both options visit our Tikka Performance Center).
- Magnum Bolt Body: You need a Tikka bolt body with a magnum bolt face. (Visit our Tikka Performance Center).
- Long Action Bolt Stop: The 6.5C uses a short-action bolt stop. You need a Tikka long-action bolt stop to allow the bolt to pull back far enough to cycle the longer 7PRC cartridge (Review your options in this page).
- Magazine: Use appropriate size factory Tikka magnum magazine, or an appropriate AICS compatible size magazine with AICS compatible chassis (Visit our Tikka Performance Center).
| Product Features: |
- Enables re-barreling of rifles to different length cartridges
- Tactile serrations at the tip for grip in all weather conditions
- Replaces the factory cast steel unit with a much tighter fit version
- CNC machined from 416 Stainless Steel
- Strong and outstanding corrosion resistance
- Short, Medium and Long lengths available for re-barreling to any cartridge
- 'Long' - designed for 30-06, Magnum and similar cartridge sizes
- 'Medium' - designed for .308 Win and similar cartridge sizes
- 'Short' - designed for .223 Rem and similar cartridge sizes
- Body finish: Bead-Blasted Gray
- Front Face finish: Bead-Blasted and Polished
- Includes: Bolt Stop Pin and Spring (both stainless)
- Designed and Made in Canada by PR Precision Rifles
