PRS CoreBrake™ is a screw-on muzzle brake designed to reduce felt recoil and eliminate muzzle rise all in a small package. This muzzle brake is designed to fit the Precision Rifle Series (PRS) threaded barrels without any modification. It is manufactured with very precise tolerances to be screwed-on and then fastened. It replaces the factory flash hider without any shims or washers.
Our PRS three chamber muzzle brakes deliver substantial improvements over the factory flash hider and other after market muzzle brake models while adding only 1.5" to the overall length of the rifle.
In addition to reducing the felt recoil by 45%, the primary advantage of our muzzle brake is the reduction in muzzle rise. Design efficiencies have allowed for a faster target acquisition where muzzle rise is virtually eliminated. Field tests have also shown that the overall vertical dispersion is reduced over the factory and other aftermarket muzzle brakes using the same load.
Must Read Safety and Installation Tips ...
Advantages of PRS CoreBrake™:
- Eliminates muzzle rise and rifle torque
- Improves recoil reduction compared to factory and other after market muzzle brakes models
- Reduces vertical dispersion
- Maintains rifle's accuracy
- Easy to install and does not need any shims or washers
| Product Features: |
- Available .223, 22-250 with 1/2x28 threading or .308W, 6.5C, 6.5PRC with 5/8x24 threading for PRS threaded rifles from Various rifle manufacturers such as
- Browning
- Bergara
- Tikka T3/T3x CTR/TAC A1
- Remington
- Savage Arms
- Ruger
- Mossberg
- HS Precision
- Double bolt clamping system
- Three Chamber Muzzle Brake
- Oxidized and Mil-Spec Cerakote Coated
- Approximate weight for Stainless Steel construction 0.40 Pound
- Approximate measurement 2.250” Length x 1.370” Diameter
- Fits original factory threading of 1/2x28 or 5/8x24
- No need for washers or shims
- Made in Canada by CORETAC SOLUTIONS INC.
