Modular Driven Technologies

MDT LRA S90 Bracket Spuhr Mounts

$80.00
SKU:
MDT-LRA-SPM
Availability:
In Stock items ship in 1-2 days
  • Flat Shipping

  • Safe Payments

  • Excellent In-stock Selection

  • Amazing prices

The Picatinny mounting portion of the Send iT MV3 can be reversed for left hand configurations. When the Picatinny mounting portion is removed, a square boss with 5 holes will be exposed allowing LRA and other manufacturers to attach the Send iT MV3 a variety of mounts, rings, bases, and chassis. The outer four holes are tapped #4-40 which are used to hold the Send iT portion to the supplied Picatinny mount. The center hole is tapped for a #8-32 and may be used for additional mounts such as the LRA 90 degree bracket or the LRA to SPUHR S90 degree bracket.

LRA S90 Bracket Allows the Send iT MV3 to be mounted directly to Spuhr’s SP, SA, SS, and ST models in the vertical Position.

Attention! Some mounts may require Spuhr A-0001: Spacer 4mm. Contact your Spuhr dealer for specific applications. Included; -LRA S90 Bracket -#8-32 screw (1) -4mm x 10mm screws (2)



Important Tech Note:

**Warning** Screw lengths MUST be checked PRIOR to attaching the mounts. In some applications the screw can “bottom out” against the scope tube or damage other components if the screw length is excessive or the wrong size/thread pitch is used. YOU are RESPONSIBLE to check the length and size of screws and verify interferences before final assembly. LRA is not liable for damage to our products or the products they are being mounted or attached to.

Step 1- Attach the LRA S90 to the Spuhr mount using the (2) supplied 4mm x 10mm flat head screws using either an IP20 or T20 Torx Plus or Torx drive. Torque both screws to 20-25 in-lbs.

Step 2- attach the Send iT MV3 to the LRA S90 bracket. Follow the instructions included with the Send iT MV3 for removal of the Picatinny mount (link below). Carefully fit the Send iT into the pocket of the LRA S90 bracket by hand and confirm it’s sitting flat and fully seated BEFORE installing the screw. Install and torque the (1) supplied # 8-32 Flat head screw to 30-34 in-lbs using a 3/32 Allen drive.

Product Features:
  • Material: Black anodized aircraft grade aluminum
  • Weight: 22g
  • Made in Canada by MDT CORP.
Manufacturer Warranty