CoreBrake™ is a screw-on muzzle brake designed to reduce felt recoil, eliminate muzzle rise and minimize flash and dust signatures. The muzzle brakes are designed to fit the SAKO TRG 22/42, TRG A1, TRG M10 and BLASER TACTICAL 2 factory threaded barrels without any modification. They are manufactured with very precise tolerances to be screwed-on and then fastened.
Our four chamber muzzle brakes deliver substantial improvements over the factory and other after market models. In addition to reducing the felt recoil by 60%, the primary advantage of our muzzle brake is the reduction in muzzle rise. Design efficiencies have allowed for a faster target acquisition where muzzle rise is virtually eliminated.
The CoreBrake™ is designed to raise less dust or create shock waves off the ground compared to factory or after market muzzle brakes. Field tests have also shown that the overall vertical dispersion is reduced over the factory and after market muzzle brakes using the same load. In addition, the flash at the muzzle is significantly reduced over the factory models.
Must Read Safety and Installation Tips ...
Advantages of CoreBrake™ for Sako S20 Series:
- Eliminates muzzle rise and rifle torque
- Improves recoil reduction compared to factory and aftermarket models
- Reduces vertical dispersion over factory models
- Reduces flash and dust signature compared to factory and other aftermarket models
- Maintains rifle's accuracy
| Product Features: |
- Available in .223R, 260R, 6.5, .308W, 300WM and .338LM for the following SAKO TRG 22/42, SAKO TRG A1, SAKO TRG M10 and BLASER TACTICAL 2 rifles
- Double bolt clamping system
- Four Chamber Muzzle Brake
- Mirage band screw included
- High quality 416 Stainless Steel
- Oxidized and Mil-Spec Cerakote Coated
- Approximate weight is 295g
- Approximate measurement 2.70” Length x 1.4"-1.5" Diameter
- Fits original factory threading of 18x1
- Made in Canada by CORETAC SOLUTIONS INC.
Examples of Sako TRG Rifles:
