The Atlas Bipod CAL No-Clamp BT65-NC Gen2 was designed with a wider footprint than other Atlas Bipods such as the V8 and PSR in order to provide greater stability. It's comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat-treated stainless steel components.
The Atlas Bipod Gen2 BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads (A.R.M.S 17S Hole Pattern).
This allows you to install any Arca Swiss Calmp, Picatinny Clamp or M-LOK mount with the same hole pattern such as the following [not included]:
- Sunwayfoto Atlas Bipod Dual ARCA and Picatinny Adapter System,
- AREA 419 ARCALOCK Clamp Atlas Bipod Kit,
- ARISAKA Atlas Bipod Rail Slider System,
- Atlas M-LOK Adapter,
- ADM Picatinny QD Adapter ADM-170-S,
- Other adapters (BT19, ARMS17S, TRAMP, LT271 and ARCA.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.
With the Atlas CAL bipod mounted to your rifle, you will be able to lock and un-lock the canting motion by rotating the lever. Turn clockwise to lock and counter clockwise to un-lock. The lever position can be adjusted for positioning by pulling the lever directly away from the body of the CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved.
Advantages of Atlas Bipod CAL No-Clamp BT65-NC Gen2:
- Independent, intentional and non-orientated leg positioning allows for either hand to move the leg into any one of the five leg positions
- Solid leg positions allow the shooter to load the bipod at the 45° and 90° positions
- Non-orientated leg length adjustment can be done by either hand: Outer leg slides on the Inner leg locating on any of five positions at ¾” apart
- Optional 3” Leg Extensions to allow for height increase
- Standard soft and durable Rubber feet which are suitable for many surfaces
- Optional interchangeable feet accessories easily swapped in the field with the press of a stainless steel plunger with a bullet tip
- Durability and super strength
- Quality material and construction
- Light weight
| Product Features: |
| Height Range | Weight | Optional Feet | Mounting Options | Non-Rotating Legs | 90° Footprint Spread | APEX Height | Folded Width | 45° Leg Position | Total Leg Positions | Pan | Cant | Adjustable Pan/Cant Tension | Fore/AFT Limiting Bosses | Inner Leg Material |
| 4.8"-9.2" | 12.65 OZ | YES | BT19, BT70, ADM-170-S, ARMS17S, TRAMP, LT271, ARCA [none included] | YES | 9.0"-12.5" | 1.54" | 3.75 | YES | 5 | NO | 22.5° +/- 45° Total | Adjustable Preloaded Cant Only | NO | 6061-T6 Aluminum |
- NATO Designation Number: 1005-01-715-0851
- Height Range: 4.8–9.2"
- Cant: 45°
- 5 leg positions: 0°, 45°, 90°, 135° & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Leg Construction: Larger, stronger inner legs
- Footprint: 9–12.5"
- Color: Black
- Weight: 406g
- Designed, Engineered, Machined & Assembled in USA by B&T Industries.
Manufacturer Warranty
