The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are to be most important in a precision rifle bipod.
With an overall design direction and approval for the bipod, MDT began to dive deeper into specific bipod features, like adjustable leg lengths, cant with adjustable tension, bipod legs that could be deployed both quickly and easily, and of course stability and strength. Determined to incorporate all of these features at a cost that made sense, MDT would not stop until they had achieved the project goal.
Uneven terrain is a big problem for some bipods, and often causes issues when attempting to level your rifle and get your crosshair on target quickly. The MDT GRND-POD leg lengths are independently adjustable to accommodate for these real-life scenarios where you don't get to simply lay your rifle on flat ground.
Along with the independent leg adjustability, bipod cant also plays an important role in stabilizing your rifle on rocky or uneven terrain. With toolless tension adjustment and one-handed operation, the MDT GRND-POD not only addresses these concerns but squashes them.
Speed plays such an important factor in precision rifle sports, or simply the convenience of product use in general shooting. Leg position and length, cant tension and adjustment, stowing and deploying your MDT GRND-POD can all be done with a single hand, leaving your other hand completely free to control the rifle.
Height adjustable from 4.5” (50° forward position) to 9.0” (90° down position) as measured from the pivot point.
The MDT GRND-POD’s compact and lightweight design combined with both forward and backward stowing positions make it a breeze to transport.
Advantages of MDT GRND-POD Bipod
- Up to 40° of Cant
- Adapts to any terrain
- 0, 50, 90 and 180 Degrees of locking independent Leg rotation front to back
- Height range from 4.5" (50 DEGREES FORWARD POSITION) TO 9.0" (90 DEGREES DOWN POSITION)
- One-handed operation
- Rapid deployment
- Lightweight
- Compact for easy Transport
- Compatible with Atlas Bipod Feet
Tech Note:
The Atlas Bipod Feet accessories are compatible with GRND-POD bipods.
| Product Features: |
| Height Range | Weight | Optional Feet | Mounting Options | Non-Rotating Legs | 90° Footprint Spread | APEX Height | Folded Width | 45° Leg Position | Total Leg Positions | Pan | Cant | Adjustable Pan/Cant Tension | Fore/AFT Limiting Bosses | Inner Leg Material |
| 4.5"-9.0" | 400g | YES | Arisaka Picatinny Rail Slider, BT19, BT70, ADM-170-S, ARMS17S, TRAMP, LT271, ARCA [none included] | YES | 7.9-10.9 | 1.50" | 2.0 | YES | 4 | NO | 40° Total | Adjustable Preloaded Cant Only | NO | 6061-T6 Aluminum and Carbon Fiber |
- Up to 40° of Cant
- 0, 50, 90 and 180 Degrees of locking independent Leg rotation front to back
- Height range from 4.5" (50 DEGREES FORWARD POSITION) TO 9.0" (90 DEGREES DOWN POSITION)
- Footprint width 7.9” - 10.9”
- One-handed operation
- Rapid deployment
- Lightweight
- Compact for easy Transport
- Compatible with Atlas Bipod Feet
- Weight: Approx. 400g
- Made in Canada by MDT CORP.
