Home | Search | About Us | FAQ | Resources | Affiliated Links | Contact Us
  Savage Bolt Handle Kit    
Payment Options

You do not need a PayPal account to pay by Credit Card.

Copyright 2007-2014
All Rights Reserved


All Black Tactical Bolt Handle and Oversized Knob

for Savage Arms Centerfire Rifles

Product Description
Titanium All Black Savage Handle
This Upgrade Tactical Knob and Bolt Handle Kit for Savage Arms Centerfire Rifles (Models 10/110, 11/111, 12/112, 16/116 and Stevens 200) is super-strong and ultra-light. The bolt handle is a fully CNC machined 1-piece Grade 5 Titanium Alloy for Savage Centerfire models.

No other rifle benefits more in weight savings by replacing the original factory handle. The oversized cast steel factory handles from Savage are excessively heavy. Lumley Arms Titanium version with oversized 7075-T76 Aircraft Aluminum knob weighs 2.1oz (60g), which is over 50% lighter than the factory handles at 4.2oz (120g)! - without making any compromises on strength, finish or quality.

Lumley Arms start with the best quality grade 5 Titanium Alloy (Ti6Al4V) and CNC machines the unit to tight tolerances to fit the factory Savage bolt. There are no castings, forgings or rough finishes. Lumley Arms glass bead blasts the units, visually inspects them and then test fits each to a factory bolt before packing. The All Black Tactical Bolt Handle upgrade is Cerakoated.

You will not get a stronger, lighter and tougher bolt handle kit anywhere! Whether you are building the ultimate hunting rifle, need to shave a precious few grams of the competition rifle, or like us, simply want to use the best gear available, these are the ultimate Savage replacement.

Tech Note:

This handle is not designed to fit the Savage axis.

Titanium Savage Handle
Advantages of Tactical Bolt Handle and Knob Kit:
  • Better grip
  • Extreme Precision and smooth bolt manipulation
  • Faster bolt manipulation
  • Durability and super strength
  • Quality material and construction
  • Lightweight

Installation Tips:

The Savage bolt handle are secured to the rear of the bolt body by a large hex-head screw (in most cases). The handle can be removed from the bolt body by using a 1/4" Allen Key and turning this screw counter-clockwise. Once the original handle has been removed, the bolt handle kit will slot into place, with the handle either facing left (for LH bolt handles) or facing right (for RH bolt handles). If your bolt body dimensions are larger than usual, some trimming of the collar with a small needle file or stone will be required (detailed below). Apply a small amount of quality bolt grease to any surface modified before reassembly. Please don't over tighten the large bolt screw when reassembling and avoid cross-threading.

Note: Minor filing of the collar may be required to fit to factory bolt body!

The upgrade bolt handle kit is machined to TIGHT tolerances for the perfect 'no-wiggle' fit. In most cases the upgrade bolt handle kit will firmly press on (or tap on with a nylon-tipped hammer) to your factory-original bolt body. Just to be sure, Lumley Arms test every unit on two factory bolt bodies before packing. In some cases; however, minor adjustment of the titanium collar with a file or stone will be needed where the collar contacts the top and bottom of both tabs at the end of the bolt body. This is due to wider variations in factory tolerances between individual Savage rifles. Some after market aftermarket bolt bodies are manufactured with larger-than-original dimensions on these two tabs which will require modification.

Product Features
    Titanium All Black Savage Handle
  • Handle and Bolt Collar:
    • CNC machined 1-piece Grade 5 Titanium Alloy
    • Available in right-handed version
    • Weight: 30 grams or 1.0 OZ!
    • Finish: Cerakoate Matt Black
  • Knob:
    • 7075-T76 Aircraft Aluminum Alloy
    • Threaded section = 30.5mm or 1.2" deep
    • 5/16" x 24 TPI female thread to accept most bolt handles
    • Weight: 30 grams or 1 OZ!
    • Finish: Milspec Anodized Matt Black
  • Complete Kit weighs 60 grams (2.1oz)!
  • Fits Savage Arms Centerfire Rifles such as 10/110, 11/111, 12/112, 16/116 and Stevens 200. This Kit will not fit Savage Arms AXIS
  • Made in USA by (Lumley Consolidated Industries Inc.) BoltKnobs.com
Purchase Options

Tactical Titanium Bolt Handle and Oversized Knob
for Savage Arms

Titanium Savage Handle and Aluminum Knob

Shipping: In Stock items ship in 1-2 days
Overall Color: Black
Direction: Right Handed
Price: $105.00


Proud sponsor of the
Mammoth Sniper Challenge

Proud sponsor of the
Argyll Cup Sniper Challenge

Proud sponsor of the
Alberta Long Range Rally Shoot

Proud sponsor of the
Police Marksmanship Challenge

Proud “Recruit” sponsor of the Canadian Forces Small Arms Competitions Awards Program

Company Information

P.O. Box 48081
Dundas Sheppard
Mississauga, Ontario
L5A 4G8
(647) 204-7209
Email: info@coretacsolutions.com

    Home | Search | About Us | FAQ | Resources | Affiliated Links | Contact Us