Lumley Arms Savage PRE 2019 Bolt Lift Kit

This is Lumley Arms version of the Savage Bolt Lift Kit for pre-2019 Savage models with the 'old style' firing pin where the cocking indicator doesn't protrude through the BAS.

This kit reduces your bolt lift weight by decreasing the bearing surface between the BAS and cocking piece sleeve (which cocks the firing pin assembly). Lumley Arms kit differentiates itself from others by using the best materials and coatings to achieve high hardness and corrosion resistance coupled with weight reduction. These are very competitively priced products and offer a lifetime of hard use in all environments.

Advantages of Lumley Arms Savage Bolt Lift Kit:

• Strong and corrosion resistant
• High quality material and construction

Fitting Guide:

Please refer to the image gallery below for the exploded diagrams of where these components fit within the bolt assembly. Minimum tools required are 1/4" and 1/8" hex keys.
If in doubt we recommend having a gunsmith fit the kit.

Easiest method is holding the bolt firmly with the BAS facing upwards in a padded vice. Be aware of the spring pressure before unscrewing the BAS. We recommend applying a small amount of bolt-lug grease or similar viscosity grease to the BAS threads prior to installation and decocking the bolt first then recocking following reassembly. We supply the kit with the set screw installed into the BAS in the recommended position; however, it can be adjusted by using a 1/8" hex key, including after the bolt is fully assembled and inserted into the rifle.

• BAS (Gray color) - Ti6Al4V titanium alloy with a glass bead blasted finish
• BAS (Black color) - Ti6Al4V titanium alloy with a DLC coating (PVD) finish
• Set Screw - 17-4 stainless steel furnace hardened to 30 HRC then TiN coated (PVD)
• Disc - 17-4 stainless steel furnace hardened to 30 HRC then TiN coated (PVD)
• The length of the BAS has been dimensioned to accommodate both the set screw and disc to remove pressure on the firing pin assembly.
• Weight = 0.57oz (16.2 grams)
• BAS hex socket = 1/8" hex key
• Set Screw hex socket = 1/4" hex key
• 1 x BAS (gray or black color)
• 1 x Set Screw
• 1 x Disc
• Made in Australia by Lumley Arms INC.