This is a replacement Tactical Knob and Bolt Handle Kit for SAKO A7 Rifle which is super-strong and ultra-light. The handles are manufactured from grade 5 aerospace titanium alloy, and the knobs are moulded from genuine 3K carbon fibre (not
from imitation stencil or film).
Lumley Arms handle consists of two pieces: First a
garnet-blasted titanium sleeve that matches the external profile and
finish of the original factory handle. Second a bolt body which is then secured into
a titanium fastener with the common 5/16"x24 TPI thread. Lumely Arms handle
and knob combo fits all SAKO A7 models in both left and right handed configurations.
An oversized tactical bolt knob made from genuine carbon fiber (5/16"x24 TPI thread) has
been included with the kit.
You will not get a stronger, lighter and tougher bolt handle kit anywhere!
Whether you are building the ultimate hunting rifle, need to shave a precious few grams of
the competition rifle, or simply want to use the best gear available, these are the ultimate
SAKO replacement. The handle and tactical knob combined weighs 23 grams versus the factory steel unit at 39 grams.
Advantages of Tactical Knob and Handle Kit:
Faster bolt manipulation
Durability and super strength
High end material and construction
Extremely light weight
The factory handle of the Sako A7 is retained in the bolt body by a hex
head bolt using a metric M5 thread. Lumley Arms handle uses a custom titanium grade 5 bolt with the same M5 thread but with a tapered and threaded end for the bolt knob to screw onto (5/16"x24 TPI). A profiled titanium sleeve is held captive between this bolt knob and the bolt body once assembled.
The factory handle can be removed by firstly removing the factory knob then
using a hex key to unscrew the fastener retaining the factory handle to
the bolt. Lumley Arms handle can then be installed by inserting the fastener through the sleeve with the hex socket facing away from the bolt body. Screw the M5 (smaller thread) end of this fastener into the bolt body firmly using a hex key. The bolt knob can then be screwed into the end of the handle. Ensure sleeve is aligned to mating end of spigot on bolt body as pictured above.
If using a thread locking compound to attach the bolt handle or bolt knob, we don't recommend using anything stronger than purple Loctite (222) or equivalent.
If using a stronger thread locking compound, be very careful never to overheat the bolt if using a propane torch to remove the handle in the future.
CNC Machined handle from Grade 5 aerospace Titanium alloy
5/16" x 24 TPI male thread to accept most bolt knobs
Fits both left-handed and right-handed versions
Genuine 3K carbon fibre, 25.5mm wide x 24.5mm long
Outside diameter = 25.5mm
Threaded section = 17mm deep
6061-T6 threaded insert epoxied-in during manufacture
5/16" x 24 TPI female thread to accept most bolt handles
Weighs 10 grams!
Made in USA by (Lumley Consolidated Industries Inc.) BoltKnobs.com
Tactical Oversized Knob and Handle Kit for SAKO A7
Shipping: In Stock items ship in 1-2 days Finish: Brushed Price: $79.00